DELL Inspiron Mini 10 - LCD Screen Replacement - www.ScreenCountry.com On YouTube.
www.ScreenCountry.com -- Step-by-step Description Below Steps: 1. Remove square, black stickers covering 2 screws and unscrew. 2. Pry plastic front from the back; it is held together with small clips along the edge and remove. 3. Unscrew 4 screws along front edge of LCD. 4. Pull LCD forward and unstick wire from back of LCD. 5. Pull up front of sticker connected to the LCD connector, careful not to lift the full sticker covering entire LCD connection board. 6. Pull the connection down from the back gently until seperated. 7. Unscrew 4 screws along outer edge of screen to detach it from metal harness. 8. Replace with new LCD and screw on outer harness. 9. Connect LCD connector into the male receiver until cleanly fit; you can hear a slight click when done correctly. 10. Press LCD against back wall and insert the 4 securing screws. 11. Clip-on front plastic until secure. 12. Insert final 2 screws on bottom of LCD and cover with sticker-coverings. 13. Attach battery and turn on the computer to check the LCD display. Common problems: If the LCD color is off or not coming on at all, repeat steps 1 - 7 making sure that the connection between the cable and the LCD board is secure with no obstructed or pinched wires. If final 2 screws don't insert comfortably, repeat steps 1 - 3 and make sure the screws are in the correct location and completely tightened. If there are any other problems, stop, breathe, and rewind. If all else fails, google has the answers. Screen purchased form ...
Tags: Inspiron, mini, dell, lcd, repair, replace, computer, steps, guide, 10, screencountry, screen country, www.screencountry.com, screencountry.com
No comments:
Post a Comment